BAQUACIL ® FAQS
|
1. What is chlorine-free BAQUACIL®?
The active ingredient for BAQUACIL ® is poly (iminoimidocarbonyliminoimidocarbonyliminohexamethylene) hydrochloride. A shorter version (but not that much shorter) is polyhexamethylene biguanide or PHMB. Simply, the active ingredient for BAQUACIL ® is an organic polymer that is effective against a broad range of microorganisms that are significant in the maintenance of swimming pools in a hygienic state.
Back to Top |
2. Can I use BAQUACIL® if I have a DE filter? What about a sand filter? A cartridge filter?
Yes, BAQUACIL ® may be used in pools with all different types of filters.
Back to Top |
3. How often should I clean my filter?
Basically there are two ways to clean your filter: physically and chemically. Both physical and chemical cleaning are essential to the smooth operation of your filter.
As the pool water is pulled through the skimmer and/or main drain, dirt and debris are separated from the water because they are too large to pass through the small openings in the filter. These large particles that are retained in the filter must be removed physically by:
- Backwashing if it's a sand filter
- Backwashing, bumping or draining if it's a DE filter
- Hosing off if it's a cartridge filter
A good cleaning should be done if the pressure on the filter gauge is 8-10 psi above the starting pressure when the filter is clean.
In addition to physically cleaning your filter, you must also chemically clean it in order to dislodge any deeply embedded particles or break up and remove any debris such as grease, oil or scale. A filter should be chemically cleaned at least twice a season (middle and end). Be sure to talk with Pool Park, your Local authorized BAQUACIL ® Dealer for proper instructions on doing this.
Back to Top |
4. Is BAQUACIL® compatible with all chemicals?
No, BAQUACIL® is not compatible with chlorine, any copper based chemical or non-chlorine shock.
Back to Top |
5. If I want to convert to BAQUACIL®, do I need to drain my pool?
No, converting your pool to BAQUACIL ® is a very easy process. Consult Pool Park, your nearest Local Authorized BAQUACIL ® Dealer and they will instruct you on the proper procedures to start your pool on BAQUACIL ® .
Back to Top |
6. How long should I run my pump each day?
You should run your pump at least 8-12 hours each day.
Back to Top |
